Festo CMMS-ST-C8-7-G2 Assembly And Installation

2. Safety instructions for electric drives and controllers
Festo.P.BE-CMMS-ST-G2-HW-EN 1008NH 15
Warning
DANGER!
High electric voltage due to incorrect connection!
Danger of death or bodily injury due to electric shock!
Warning
DANGER!
Surfaces of the device housing may be hot!
Danger of injury! Danger of burning!
Warning
DANGER!
Hazardous motion
Danger of death, serious bodily injury or damage to property due to
unintentional movement of the motors!
2.4 Safety instructions
2.4.1 General safety instructions
Warning
The stepping motor controller conforms to protection class IP20
and contamination class 1.
• Ensure that the working environment also complies with this
protection/contamination class.
Warning
• Use only accessories and spare parts which are approved by the
manufacturer.
Warning
• In accordance with the EN standards and the VDE regulations,
the stepping motor controllers must be connected to the grid in
such a way that they can be disconnected using appropriate
isolating equipment (e.g. main switch, contactor, circuit
breaker).

Festo CMMS-ST-C8-7-G2 Specifications

General

Brand	Festo
Model	CMMS-ST-C8-7-G2
Category	Controller
Language	English