Festo CMMS-ST-C8-7-G2 Assembly And Installation

3. Product description
68 Festo.P.BE-CMMS-ST-G2-HW-EN 1008NH
Settings in the FCT
The parameters set here are valid for jogging via I/O interface, jogging via FCT and for
jogging/teaching via field bus if no other values are specified via the field bus. The
acceleration also applies with “individual step” via FCT.

Festo CMMS-ST-C8-7-G2 Specifications

General

Brand	Festo
Model	CMMS-ST-C8-7-G2
Category	Controller
Language	English