1. Installation
1-17
Festo P.BE-CPX-FB32-EN en 1111a
Network setting stored in the CPX-FB32 a n d setting with DIL
switches
Analogously to the section “Fixed addressing via DIL
switches”, the last octet of the IP address is set with the DIL
switch 3.
But the first 3 octets are not necessarily “192.168.1”,
but can be freely selected via the IP address parameter.
The settings can be changed with the Handheld (CPX-MMI) or
via the CPX Festo Maintenance Tool (CPX-FMT).
This addressing option is available to you from Revision 18.
To Next Page
Loading...
