Fike ECS Series - Section 4: Device Installation; Connecting AC Power and Batteries; Installing the FIK-NVCM; 1: FIK-NVCM Board Layout

ECS Series Manual — P/N LS10262-001FK-E:A 3/3/2021 20
Section 4: Device Installation
4.1 Connecting AC Power and Batteries
Refer to the FACP’s installation manual for proper AC power connections.
4.2 Installing the FIK-NVCM
This section provides information on the FIK-NVCM, Network Voice Control Module. The FIK-NVCM is compatible with the FCP-
2100ECS and FCP-300ECS FACPs.
For more information on how to install or remove the FIK-NVCM Network Voice Control Module, see installation sheet PN
LS10169-002FK-E.
4.2.1 FIK-NVCM Board Layout
Figure 4.1 Front View of FIK-NVCM
ECS Series Model Number FACP Installation Manual
FCP-300ECS LS10145-002FK-E
FCP-2100ECS LS10143-002FK-E
Network Connector P4
Keypad connector P3
VBUS1
VBUS2
Port 1
Port 2
AUX AUDIO
CMD1
COMMON
CMD2
Fiber
Module
Connectors