14
CONTRAST SETTING
The LCD contrast is adjustable
from 0 to 100%. To adjust the
LCD contrast enter the Main
Menu and navigate to the
“Display Setup” menu using the
“
” softkey.
When highlighted enter the
Display Setup menu by selecting
the “ ” softkey. Navigate through
the “Display Setup” menu using
“
” softkey until the “Contrast”
entry is highlighted.
Press the “
” softkey to select the contrast parameter setting.
Use the “
” / “ ” softkeys to set the contrast value.
Note: Setting the contrast value below 30 may render the display to be unreadable.
To Next Page
Loading...
