15
DISPLAY MODE SETTING
Two display formats are available:
“Single” display and “Dual”
display formats. To access the
display format setting, enter
the Main Menu. Navigate to the
“Display Setup” menu entry using
“
”
softkey. When highlighted,
enter the Display Setup menu
by selecting the “
” softkey.
Navigate through the “Display
Setup” menu using “
” softkey
until the “Display Mode” entry is
highlighted.
Choose the desired display mode
setting by cycling through the list
of choices using the
Change “
” softkey.
DEFAULT DISPLAY
To configure a particular display
as the default startup display,
access the desired display and
leave active for 5 minutes. The
system will automatically set this
display as the default startup
display.
To Next Page
Loading...
