67
Firmware upgrade procedure using the USB
pen drive
1. Access the updated firmware packet from the
FireClass website; the correct file name has the
‘FWxxxxxxBIN’ format.
2. Get a FAT or FAT32 USB pen drive.
3. Create a folder named ‘F_FW’ at the root of the USB
pen drive.
4. Copy the downloaded file into the ‘F_FW’ folder.
5. Insert the USB pen drive on a working panel.
6. Click on the 1=Program menu and select option
7=USB followed by option 5=FW Upgrade.
7. Wait until the panel returns to the main page. This
procedure takes a few minutes to complete.
Note: The upgrade procedure may take several minutes
to complete
To Next Page
Loading...
