10
Description DMP10 / DMP20
Displays the currently measured coating/base material combination: non-fer-
rous coating material on ferrous base material; display only with the DELTA-
SCOPE® and DUALSCOPE® gauge models
Displays the currently measured coating/base material combination: electri-
cally non-conductive and non-ferrous coating material on electrically conduc-
tive non-ferrous metals; display only with the ISOSCOPE® and DUALSCOPE®
gauge models
Battery status indicator: fully charged
Battery status indicator: replace battery soon
If the battery voltage is too low, the gauge switches off automatically, measured
readings and settings are retained
Energy-saving function, display dimming active
A period of time for at least one of the energy-saving functions is set.
USB connection active, gauge is connected to a PC via USB, for example
Free Running measuring mode active
Offset function is active
The automatic storing of measured readings is deactivated
On/Off switch, – parameter/function is activated
On/Off switch, – parameter/function is deactivated
Parameter selection – parameter/function is activated
Parameter selection – parameter/function is deactivated
n Number of measured readings
• Number of all measured readings in the batch
Arithmetic mean of the batch with n measured readings
NF/FE
NC/NF
O
x
To Next Page
Loading...
