FISCHER DELTASCOPE DMP10 - Changing the Unit of Measurement for the Batch

70
Batch settings DMP10 / DMP20
Meas. unit
µm (example)
Offset
Information about the offset: off or set offset value.
Measure Mode
Information about the set measuring mode: Single Readings or Free Running
Values rounding
Information about the resolution of the displayed values: number of decimal places
used to display the measured reading and the statistical values.
Save Readings
Information indicating whether this function is activated or deactivated for the batch.
Air Reference
Information indicating how the probe acquires the air value for the batch.
12.2 Changing the unit of measurement for the batch
You can change the unit of measurement for the batch, as well as its batch statistics.
To change the unit of measurement
1. > Batch Modify > OK > Meas. unit > OK > select desired unit of measurement
> OK
Unit of measurement is activated:
2. Have you selected the Own Unit unit of measurement?
• No: Continue with step 3.
• Yes: Set the desired variables for your own unit of measurement:
a : Select the parameter Own Multiplier and set the multiplier related to
the unit of measurement µm.
b : Select the parameter Own Unit and assign a name for the unit of
measurement.
Change the name:
• Move cursor using the and OK keys
• Select characters using the and OK keys
• Delete characters by selecting the space ( )
[ ]