72
Batch settings DMP10 / DMP20
2. Have you selected the Statistics Measurement view?
• Yes: Select the desired characteristic variables:
a > OK.
Characteristic variable is switched on:
A maximum of 6 characteristic variables can be displayed in the
Measurement view Statistics, description of characteristic variables,
14.
b Continue with step 3.
• No: Continue with step 3.
3. Exit the menu: , the settings are now made.
The measured readings (and statistical evaluations) are displayed according to the
newly set Measurement view.
12.4 Selecting characteristic variables for the statistical display
For the batch, you can select the statistical characteristic variables that are to be dis-
played on the evaluation page Batch Statistics.
To select the statistical characteristic variables
1. > Batch Modify > OK > Views Settings > OK > Batch Statistics View > OK
2. Select the desired characteristic variables: > OK.
Characteristic variable is activated:
Description of the characteristic variables, 14
3. Exit the menu: , the settings are now made.
12.5 Setting the decimal places for the display values
For the batch, you can set the number of decimal places for displaying the measured
reading and for the values of the statistical characteristic variables both in the Mea-
surement view and in the statistical display.
[ ]
To Next Page
Loading...
