77
DMP10 / DMP20 Gauge settings
3. Set the desired time or date or select the desired format:
Date and time setting
• Move cursor using the OK and keys
• Number selection using the keys
Format selection: > OK
Format is selected:
4. Repeat steps 2. and 3. for more menu settings.
5. Exit the menu: , the settings are now made.
13.6 Default settings for unit of measurement and decimal places
The menu functions Preset Unit and Preset rounding under > Gauge Settings > OK
> More Settings > are inactive.
13.7 Activating/deactivating lock code
Use the lock code to activate/deactivate the lock function (Lock Calibration) for select-
ed calibrations.
To activate the lock code
1. > Gauge Settings > OK > More Settings > Define Lock Code > OK > set desired
lock code > OK
2. Confirm the activation information: OK
3. Exit the menu: , the lock code has now been activated.
To deactivate the lock code
You must know the lock code to deactivate it.
1. > Gauge Settings > OK > More Settings > Delete Lock Code > OK > set lock code
> OK
2. Confirm the deactivation information: OK
3. Exit the menu: , the lock code has now been deactivated.
[ ]
[ ]
[ ]
To Next Page
Loading...
