11
DMP10 / DMP20 Description
s Standard deviation for the arithmetic mean ; a measure for the variation
of individual measured readings around their common mean value.
Min Lowest measured reading in the batch
Max Highest measured reading in the batch
R The range equals the difference between the highest and lowest measured
reading in a batch
V[%] Coefficient of variation, percentage variation of a series of measurements,
standard deviation in terms of the mean value , a sudden change in the
coefficient of variation indicates a change in process conditions
n<USL Number of measured readings per batch below the lower specification limit
n>OGW Number of measured readings per batch above the upper specification limit
Characteristic variables occurring during the control measurement for check-
ing a selected calibration: a description of the characteristic variables can be
found on page 59
3.7 Menus – function overview
Menu Statistics
View of the statistics for the open batch
Batch Modify menu
Settings and entries for the batch
Batch Modify > MEASURE
Opens the Measurement view, starts the measurement with the probe posi-
tioned on the specimen surface
Batch Modify > Limits
Activates limit monitoring and sets the specification limits
Batch Modify > Batch Info
Information on the measurement and batch settings
x
x
To Next Page
Loading...
