FISCHER DELTASCOPE DMP10

To Next Page

To Previous Page

DMP10 / DMP20 Data transfer

11 Data transfer

Data export is possible only from the gauge to the Tactile Suite software program.

Individual measured readings, batch statistics and the entire batch can be exported

to Tactile Suite.

Tactile Suite is a software solution for evaluating measured readings, creating in-

spection reports, archiving measured readings, inspection reports and batch files,

and for exporting measured readings in CSV format.

You can download the Tactile Suite program free of charge from the Fischer down-

load page.

Information on how to use the Tactile Suite software program can be found in the

corresponding Operator's Manual ( Tactile Suite).

Fischer download page:

https://docs.helmut-fischer.com/uum

Notes on data transfer

 Calibration data cannot be transferred.

 Interfaces: USB

 You can write the measured readings directly into an Excel spreadsheet

online via Tactile Suite during the measurement.

FISCHER DELTASCOPE DMP10 - Data Transfer