FISCHER DELTASCOPE DMP10 - Page 26

20
DMP10 / DMP20
Technical Data
Connectable probes
 Digital probes with USB-C female jack, probe names always beginning with the
letter D
 Via DMP-F-Probe-Adapter many analog probes with 10-pin male jack; probe
names beginning with the letter F or containing the letter F;
 Probes connectable to the DMP-F-Probe-Adapter: F20H, FA100, FA14, FA30,
FA70, FA9, FAW3.3, FD10, FD13H, FGA0.6H FGAB1.3, FGAB1.3T, FGABW1.3,
FGB2, FGBW2, FKB10, FKB4, FTA2.4-MC, FTA2.4-SC, FTA3.3, FTA3.3-5.6,
FTA3.3-5.6-HF, FTA3.3F-Cr, FTA3.3FG, FTA3.3H, FTD3.3, V7FKB4
 Not supported probes: duplex probes (FDX10, FDX13H, FN4D) and special
probes for special customer-specific applications
The Fischer probe program encompasses nearly 100 probes designed to ensure
optimal results with highest accuracy for the widest range of measurement ap-
DELTASCOPE
DMP10
ISOSCOPE
DMP10
DUALSCOPE
DMP20
  
  
Data retrieval from Tactile Suite,
batch, single readings, batch
statistics
  
Data transmission
via USB
Data export via Tactile Suite to
Excel® (online, offline)
Data retrieval from Tactile Suite,
batch, single readings, batch
statistics
Test methods
DIN EN ISO 2178 / ASTM D7091
Magnetic induction test method,
measurement of non-magnetic coat-
ings on magnetic substrates
DIN EN ISO 2360 / ASTM D7091
Amplitude-sensitive eddy current
test method, measurement of non-
conductive coatings on non-magnet-
ic substrate metals
DELTASCOPE
DMP10
ISOSCOPE
DMP10
DUALSCOPE
DMP20
 
 