25
1. Turn off the gas and disconnect power to the range.
2. Remove the burner assembly for the main jet holder
or simmer jet holder you wish to service (see page 47
for the procedure).
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
4. To remove a simmer jet holder:
a) Remove the 3/8” gas line nut.
b) Remove the 5/8” nut and remove the simmer jet
holder from the bracket.
3. To remove a main jet holder:
a) Remove the 9/16” gas line nut.
b) Remove the 1-1/8” nut and remove the main jet
holder from the bracket.
Main Jet Holder Nut Gas Line Nut
Gas Line Nut Simmer Jet Holder Nut
Sealed Burners
Main Jet
Holder
Simmer
Jet Holder
SERVICING THE COMPONENTS
REMOVING A MAIN JET HOLDER & A SIMMER JET HOLDER
WARNING
To Next Page
Loading...
