56
1. Remove the oven door (see page 78 for the door re-
moval procedure), and position it on a padded surface
with the hinges pointing up.
5. To remove the door handle, remove the two door
handle screws (two on each side) from the outer door
skin.
Press Down On Hinge & Release Brass Clamp
3. Remove the fi ve top and fi ve bottom screws from the
door.
4. Remove the outer door skin and handle from the door
liner assembly.
5 Top Screws
5 Bottom Screws
4 Handle Screws On Door Skin
CAUTION:
Use hand protection when releasing the
spring tension on the hinge in the next
step.
2. Press down on the hinge and unlock the brass clamp
from the hinge arms, then slowly allow the spring ten-
sion to move the arm back to its normal position.
SERVICING THE COMPONENTS
REMOVING THE OVEN DOOR HANDLE, HINGE, AND WINDOW PACK
To Next Page
Loading...
