57
7. To remove the window pack:
a) Loosen the screws on the four window pack
support brackets.
b) Remove the four top screws from the insulation
retainer and remove the retainer.
6. To remove the door hinge:
a) Loosen the indicated side hinge bracket screw
and fl at washer.
b) Remove the two bottom hinge screws and lift
the hinge out of the door liner.
Side Hinge Screw
Bottom Hinge Screws
c) Remove the large insulation from the door
Top Insulation Retainer Screws
Window Pack Support Brackets
d) Remove the pieces of cut insulation from the
door liner.
Large Insulation
e) Remove the four nuts from the window pack
and remove the pack from the door liner.
Cut Insulation
Window Pack Nuts (2 of 4)
SERVICING THE COMPONENTS
REMOVING THE OVEN DOOR HANDLE, HINGE, AND WINDOW PACK
To Next Page
Loading...
