48
5. Remove the four machine screws from the convection
motor assembly plate and lay the assembly in the bot-
tom of the oven cavity.
1. Turn off the gas and disconnect power to the range.
2. Remove the main oven door (see page 78 for the door
removal procedure).
3. Remove the racks from the oven.
4. Remove the four screws from the convection cover.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
Convection Cover (4 Screws)
Convection Motor Assembly (4 Screws)
6. Remove the two ceramic nuts off the convection motor
wires and untwist the wires.
7. Remove the convection motor assembly from the
range.
Convection Motor Wires
SERVICING THE COMPONENTS
REMOVING THE CONVECTION MOTOR
WARNING
To Next Page
Loading...
