69
BACKGUARD KITS
The backguard is located as shown in the illustration. Secure
the backguard to the wall behind the range. Specifi c instruc-
tions for installation of the full backguard or low backguard
can be found packaged with the backguard. A backguard
must be installed when there is less than a 12” clearance
between combustibles and the back of the range above
the cooking surface (see page 17).
INSTALLATION INSTRUCTIONS
BACKGUARD INSTALLATION
Wall Mount
Full Backguard
(Model #’s BGS-3030,
BGS-3036, BGS-3048)
Wall Mount
Low Backguard
(Model #’s BGS-1230,
BGS-1236, BGS-1248)
To Next Page
Loading...
