46
1. Turn off the gas and disconnect power to the range.
2. Remove the oven door (see page 78 for the door re-
moval procedure).
3. Remove the racks from the oven.
4. Unscrew the lens and bulb from the lamp assembly.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
5. Slide the fl at spring out of the lampholder.
Remove Lens & Bulb
Remove Flat Spring
SERVICING THE COMPONENTS
REMOVING AN OVEN LAMP ASSEMBLY
WARNING
To Next Page
Loading...
