27
9. Remove the four torx screws from the left and right
sides (two on each side) of the valve panel.
4 Valve Panel Screws
10. Rotate the valve panel onto the protected drip pan (if
present), or on the oven door handle so you can access
the components.
11. Remove the four front screws from the cooktop.
12. Lift the front of the cooktop, and remove it from the
range.
Left
Cooktop
Screws
Right
Cooktop
Screws
Lift Cooktop Front
SERVICING THE COMPONENTS
REMOVING THE COOKTOP – 30” & 36” MODELS
To Next Page
Loading...
