Fisher & Paykel OB60C Series User Manual

35
PROBLEM POSSIBLE CAUSES WHAT TO DO
General
The displays work,
and the function and
temperature dials halos
come on but the oven
does not heat up.
The oven is in ‘Demo’ mode. Call Customer Care.
The display shows
DOOR
The door is open during
cooking
(some functions only).
Ensure the door is shut
fully.
4.8 Trouble shooting
PROBLEM POSSIBLE CAUSES WHAT TO DO
Self Clean function (some models only)
During a Self Clean
cycle, the oven is louder
than usual.
This is normal: the oven’s cooling fans operate at their highest
speed.
The display shows
DOOR.
The door has not been properly
closed.
Make sure you close the
door properly.
The display shows
: but the oven door
will not open.
The oven door is locked
because the oven is still too hot
to be used for cooking.
Wait until the Self Clean
cycle has finished. If you
cancelled a Self Clean
cycle which was already
underway, the oven
still needs to cool down
before it can be used.
The oven door will
automatically unlock.
At a point during a Self
Clean cycle, the function
dial halo goes out
and the temperature
indicator starts
displaying cascading
bars
.
This is normal: the oven is
in the last phase of the Self
Clean cycle, cooling down.
Wait until the Self Clean
cycle has finished. A
long tone will sound
and the oven door will
automatically unlock when
the oven is ready to use.
4.8 Trouble shooting PYRO

Fisher & Paykel OB60C Series Specifications

General

Brand	Fisher & Paykel
Model	OB60C Series
Category	Oven
Language	English