ALERT CODE POSSIBLE CAUSES WHAT TO DO
D
The oven has overheated.
1 Allow the oven to cool down.
2 Once the oven has cooled down
and the door has unlocked, the
alert code will disappear. You can
now use the oven again.
D
Door lock error: the door
cannot be locked after you
have started a Self Clean cycle.
1 Turn the power to the oven off at
the wall and on again.
2 Wait approximately 10 seconds.
This is to allow the door lock to
return to its initial position.
3 Set the clock. See ‘Setting the
clock and first use’ for instructions.
4 Try starting a Self Clean cycle
again, making sure that you close
the door firmly. See ‘Using the Self
Clean function’.
D
Door lock error: the door
cannot be unlocked after a Self
Clean cycle has finished.
1 Turn the power to the oven off at
the wall and on again.
2 Try touching on the oven door to
help the door lock disengage.
3 If this doesn’t help and the
alert code reappears, call your
Authorised Repairer or Customer
Care.
)+ number
Technical fault.
1 Note down the alert code.
2 Wait until the cooling fans
have stopped and the oven has
completely cooled down.
3 Turn the power to the oven off at
the wall.
4 Call your Authorised Repairer or
Customer Care with the alert code
information.
To Next Page
Loading...
Need help?
General
