51
7.7 SYMPTOM: Oven heats slowly or fails to reach preset temperature
POSSIBLE CAUSES:
• Incorrect oven use
• Faulty door switch (pyro models only)
• Low supply voltage
• Faulty temperature sensor
• Faulty oven element / fan
• Faulty power module
DIAGNOSIS:
• Ensure the oven door closes and seals correctly.
• Check door switch
• Check temperature sensor
• Check oven element in diagnostics
• Replace the power module if no other component faults can be found.
7.8 SYMPTOM: No clock display but oven works
POSSIBLE CAUSES:
• Oven is set to “Display OFF” mode.
DIAGNOSIS:
• Hold “Cancel” button (X) down for more than 2 seconds to clear.
To Next Page
Loading...
Need help?
General
