Lit. No. 43894, Rev. 02 104 November 1, 2016
MAINTENANCE
EMERGENCY PARTS/TOOLS
• 10" adjustable wrenches (2)
• Medium at blade screwdriver
• Common pliers
• #20 & #30 TORX
®
Drivers
• Automotive blade‑style fuses (See applicable
Harness Diagram for correct fuse ratings for
your snowplow.)
• 4‑amp automotive blade‑style mini fuses
• Funnel
• 12V DC test light
• Flashlight
• 1/8" & 3/16" Allen wrenches
• 1/4" ratchet, 6" extension, 1/4" & 5/16" sockets
• Electrical tape
• Small pencil magnet
• 1 quart FISHER
®
EZ Flow Hydraulic Fluid
TORX
®
is a registered (
®
) trademark of Textron, Inc.
VEHICLE
The snowplow operating vehicle shall be maintained
according to manufacturer's recommendations.
Tire pressure shall be maintained according to
manufacturer's recommendation.
RECYCLE
When your snowplow has performed its useful life,
the majority of its components can be recycled
as steel or aluminum. Hydraulic uid shall be
disposed of according to local regulations. The
balance of the parts made of plastic shall be
disposed of in a customary manner.
To Next Page
Loading...
