Fisher Minute Mount 2 - OPERATING YOUR SNOWPLOW; Fish-Stik HAND-HELD CONTROL

Lit. No. 43894, Rev. 02 37 November 1, 2016
OPERATING YOUR SNOWPLOW
Fish-Stik
®
HAND-HELD CONTROL
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position.
2. Press the ON/OFF button on the control. The
power indicator light glows red, indicating the
control is ON. The power indicator light glows
red whenever the control and the vehicle
ignition switch are both ON and the electrical
connections to the snowplow are completed.
The ON/OFF button operates as an emergency
stop if required.
Function Time-Outs
All control functions, except LOWER/FLOAT, time
out (stop) automatically after a period of time. This
is to limit the amount of electrical energy required
from the vehicle.
NOTE: If a control function times out before
desired blade movement is complete, release
the button and press it again.
RAISE
LOWER
RL
ON/OFFFLOAT
1
3
2
4
S
C
O
O
P
R
E
T
R
A
C
T
W
I
N
G
W
I
N
G
Power Indicator
Light (red)
ON/OFF Button
(Emergency Stop
)
FLOAT Light
(green)
WARNING
To prevent accidental movement of the
blade, always push the ON/OFF button
to switch the control OFF whenever
the snowplow is not in use. The power
indicator light will turn OFF.