Lit. No. 43894, Rev. 02 20 November 1, 2016
GETTING TO KNOW YOUR SNOWPLOW
MC Series
Designed for trucks in the 17,000–27,500 GVW
range, these 9' and 10' snowplows are built for
municipalities and contractors who need to clear
parking lots, narrow streets, and intersections.
Both blades include a trip‑edge design, 8" center‑
punched reversible cutting edge, 2" x 10" lift ram,
and 2" x 16" angle rams. SnoFoil
®
assembly and
rubber deector are sold separately.
XtremeV™
The XtremeV snowplow features the popular
XBLADE™ frame construction and a tapered wing
design to provide a multiposition snowplow
with superior torsional strength. The XtremeV
snowplow comes in 7‑1/2', 8‑1/2', and 9‑1/2' widths.
The moldboard is available in either stainless or
STORM GUARD™ powder‑coated steel. Cutting
edge is standard. Available accessories include
a rubber deector, blade wing extensions, and a
back drag edge.
HDX™
The ultimate in straight blade performance and
reliability, the stainless steel HDX snowplow gives
you a whole new way to attack winter. Built for the
business of plowing, this rugged snowplow will
withstand the rigors of commercial applications.
The HDX blade is designed for 3/4‑ and 1‑ton
4x4 trucks and is a fully featured stainless steel
straight blade. An articulating A‑frame helps your
blade follow the contours of the road and provides
a cleaner scrape while the adjustable attack
angle allows you to customize your snowplow's
performance—adjust the attack angle from
55°, 65°, or 75° depending on your application.
Maximize your HDX snowplow's efciency and
reliability with a full line of plow accessories.*
* HDX snowplow accessories are compatible with
HD2™ snowplow models.
To Next Page
Loading...
