Lit. No. 43894, Rev. 02 81 November 1, 2016
2. Make sure all electrical connections, including
grounds, are clean, tight, free of rust or
corrosion, and are coated with dielectric
grease.
3. Check all plugs and seals for hydraulic uid
leaks. Repair as necessary.
4. Lubricate all moving parts, especially the
connecting pin extractors, as shown below.
Not doing so will make operation of the mount
difcult and possibly damage components.
A
here.
MAINTENANCE AND ADJUSTMENT
Your FISHER
®
snowplow is designed for rugged,
dependable service. However, like the vehicle
on which it is mounted, it needs regular care and
maintenance.
Check the following before and frequently during
the plowing season:
1. Make sure all fasteners, mounting bolts, and
hydraulic connections are tight.
MAINTENANCE
WARNING
Lower the blade when the vehicle is
parked. Keep 8' clear of the blade.
Temperature changes could change
hydraulic pressure, causing the blade to
drop unexpectedly or damaging hydraulic
components. Failure to do this could
result in serious personal injury.
To Next Page
Loading...
