Lit. No. 43894, Rev. 02 31 November 1, 2016
ACCESSORIES AND OPTIONS
REPLACEABLE CUTTING EDGES
Carbon Steel
Cutting edges made of high‑carbon steel bolt
to the base angle for maximum blade life.
Depending on the blade series, cutting edges are
3/8", 1/2", and 5/8" thick and 6" or 8" wide.
Carbide Steel
Carbide steel edges provide superior durability
and performance with longer wear compared
to a traditional steel cutting edge. Unmatched
wear resistant properties ensure long life and
exceptional performance.
UHMW Polymer
These 1"‑thick cutting edges made of durable,
lightweight polymer absorb much of the shock
and vibration when the blade encounters rough
surfaces.
Rubber
6" wide rubber cutting edges conform to the
surface being plowed rather than scraping the
plowing surface making them perfect for concrete,
parking garages, brick, pavers, cobblestone, or
any other sensitive or uneven surface. Rubber
edges are made of a tough, high‑wear compound
that provides a clean and quiet "squeegee" action.
To Next Page
Loading...
