Lit. No. 43894, Rev. 02 50 November 1, 2016
Light Flash Indicators
POWER – Red Function
OFF Control is OFF
Solid ON Control is ON and active
Slow Flash No communication
Fast Flash Snowplow is locked—enter
4‑digit security code to unlock
FLOAT – Green Function
Solid ON FLOAT function is active
Fast Flash Security code activation in
progress
Additional Notes
• The SECURITY GUARD™ system requires
any control (other than the one with the
assigned 4‑digit security code) to enter
the security code before the snowplow
can be activated. Once the security code
is established, the SECURITY GUARD
System recognizes that a control with the
same security code is attached, and does
not require a manual unlock to activate the
snowplow. The system will recognize the
control as "safe" and will automatically unlock.
• The SECURITY GUARD System is only fully
functional with joystick control PN 49700 &
49900 and hand‑held controls PN 29800 &
49800.
• In the event that a snowplow is locked and
cannot be manually unlocked or reset, contact
your Authorized Dealer.
• REMINDER: Record your security code for
future reference.
OPERATING YOUR SNOWPLOW
To Next Page
Loading...
