Lit. No. 43894, Rev. 02 84 November 1, 2016
5. If the attack angle has been changed to or
from 55°, the lower mounting position of the
springs must be changed as shown.
4. Torque upper and lower fasteners as shown:
NOTE: Lower 1" locknuts must be torqued to
764 ft-lb, and the upper 3/4" locknuts must be
torqued to 269 ft-lb.
65° & 75°
55°
CAUTION
Servicing the trip springs without special
tools and knowledge could result in
personal injury. See your authorized
outlet for service.
MAINTENANCE
Torque 3/4" fasteners
to 269 ft-lb
Torque 1" fasteners
To Next Page
Loading...
