6 Installation
FLUXUS G809 6.2 Transducers
41
UMFLUXUS_G809V2-2EN, 2020-06-25
Step 1: Dismounting of the transducer mounting fixture Variofix L
• Disassemble the transducer mounting fixture Variofix L, see Fig. 6.15.
Step 2: Fixing the clasps to the tension straps
• Select the installation instructions according to the supplied clasp:
Band clamp clasp
The clasp is fixed to the tension strap, see Fig. 6.16.
Quick release clasp
The clasp is fixed to the tension strap, see Fig. 6.17.
• Cut the tension strap to length (pipe circumference + at least 120 mm).
Fig. 6.15: Dismounting of the transducer mounting fixture Variofix L
1 – cover
2 – screw
3 – nut
4 – rail
5 – tension strap clamp
Fig. 6.16: Band clamp clasp with tension strap Fig. 6.17: Quick release clasp with tension strap
1
2
3
4
5
5
To Next Page
Loading...
