5 Transport and storage
5.1 Transport FLUXUS G809
2020-06-25, UMFLUXUS_G809V2-2EN
24
5 Transport and storage
5.1 Transport
The measuring equipment must be packaged properly for transport, see section 2.7. For weight indications of the transmit-
ter and the transducers, see technical specification.
5.2 Storage
The transmitter and the transducers have to be stored in a dry place.
Caution!
When packaging, the transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
→ Secure the transmitter against falling during packaging. Wear the required personal protective equip-
ment. Observe the applicable rules.
Caution!
When lifting, the center of gravity of the transmitter can be displaced within the cardboard box. The
transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
→ Secure the transmitter against falling during transport. Wear the required personal protective equip-
ment. Observe the applicable rules.
To Next Page
Loading...
