Flexim FLUXUS G809 - Contrast Settings

18 Settings
FLUXUS G809 18.5 Contrast settings
163
UMFLUXUS_G809V2-2EN, 2020-06-25
18.4.5 Removing all materials/fluids from the scroll list
• Select Remove all to remove all materials/fluids from the scroll list.
• Press ENTER. User defined materials/fluids will not be removed.
18.5 Contrast settings
• Select Special Funct.\SYSTEM settings\Miscellaneous.
• Press ENTER.
• Select Special Funct.\SYSTEM settings\Miscellaneous to set the display contrast of the transmitter.
The display contrast is adjusted with the following keys:
• Press ENTER.
It is possible to reset the display to medium contrast by means of a HotCode.
• Enter the HotCode 555000, see section 8.4.
Notice!
User defined materials/fluids will always be displayed in the scroll lists of the program branch Parameter. They can-
not be removed.
Special Funct.\...\Material list\user\Remove all
Special Funct.\SYSTEM settings\Miscellaneous
Special Funct.\SYSTEM settings\Miscellaneous\SETUP DISPLAY
increases the contrast
reduces the contrast
CLR sets to medium contrast
Notice!
After an initialization of the transmitter, the display is reset to medium contrast.