Flexim FLUXUS G809 - 14.5 Deletion of measured values

14 Data logger
14.4 Measurement with activated data logger FLUXUS G809
2020-06-25, UMFLUXUS_G809V2-2EN
126
14.4 Measurement with activated data logger
• Start the measurement.
• Enter the number of the measuring point.
• Press ENTER.
If Output Options\Store Meas.Data is activated and Special Funct.\SYSTEM settings\Ringbuffer is de-
activated, a message indicating an error will be displayed as soon as the data logger is full.
• Press ENTER.
The error message will be displayed periodically.
14.5 Deletion of measured values
• Select Special Funct.\Delete Meas.Val.
• Press ENTER.
• Select yes or no.
• Press ENTER.
Measuring\Channel\Meas.Point No.
DATA LOGGER IS FULL!
Special Funct.\Delete Meas.Val.
Special Funct.\Delete Meas.Val.\Really Delete?