9 Measurement
FLUXUS H721 9.3 Measurement settings
113
UMFLUXUS_H721V1-5EN, 2022-05-15
Depending on the selected source item, it is possible to output measured values, status values or event values.
HPI measurement API gravity scale value that derives from the density at standard conditions
Δ API gravity absolute change of the HPI property per set time base for the fluid change
Current fluid number of the detected fluid
Miscellaneous Custom. Input 1 measured values of input quantities (e.g., temperature, density) which are
not used for calculation
In the menu item Options\Assign inputs it is possible to assign
configured inputs to customized inputs.
Custom. Input 2
Custom. Input 3
Custom. Input 4
Sound speed Sound speed sound speed
Sound speed (Δ) absolute change of the measured sound speed per set time base for the
fluid change
Tab. 9.4: Output of measured values, status values or event values
source item measured value event value
value status
physical quantities Flow quantities xx
Totalizers xx
Fluid properties xx
Miscellaneous
(Custom. Input 1...4)
xx
Sound speed xx
Pulse xx
HPI measurement xx
Diagnostic values
(except Pig detection)
x
events Diagnostic values\
Pig detection
x
Event trigger x
Tab. 9.3: Configuration of the outputs
source item list item output
To Next Page
Loading...
