12 Dismounting and disposal
12.1 Dismounting FLUXUS H721
2022-05-15, UMFLUXUS_H721V1-5EN
138
12.1 Dismounting
Dismounting is carried out in reverse order to the installation.
12.2 Disposal
The measuring equipment has to be disposed of in accordance with the applicable regulations.
Proper disposal of components of the transmitter and accessories that are no longer required avoids
environmental damage and conserves resources.
Depending on the material, the corresponding parts have to be disposed of in residual or special waste or recycled in
accordance with the applicable regulations.
Batteries must be disposed of separately from electrical or electronic equipment. For this purpose, remove the
batteries from the device and take them to the designated disposal system.
The components are taken back free of charge by FLEXIM in accordance with national regulations. Contact FLEXIM.
To Next Page
Loading...
