17 Data logger
17.2 Deletion of the data logger FLUXUS H721
2022-05-15, UMFLUXUS_H721V1-5EN
170
17.2 Deletion of the data logger
• Select the menu item Delete meas. values.
• Press ENTER.
•Select Yes or No.
• Press ENTER.
17.3 Information regarding the data logger
• Select the menu item Data logger info.
• Press ENTER.
The following information regarding the data logger is displayed:
Special functions\
Data logger\Delete meas. values
Special functions\
Data logger\Data logger info
display description
Activated data logger is activated/deactivated
This display will only be indicated if the measurement has started and the data logger is activated.
Full (date) date on which the data logger will be full
This display will only be indicated if the measurement has started and the ringbuffer is deactivated.
Full (time) time at which the data logger will be full
This display will only be indicated if the measurement has started, the ringbuffer is deactivated and
the data logger is not full yet.
Overflow (date) date from which the oldest measured values will be overwritten
This display will only be indicated if the measurement has started, the ringbuffer is activated and the
data logger is not full yet.
Capacity (time) remaining data logger capacity
This display will only be indicated if the measurement has started and the ringbuffer is activated.
Ringbuffer ringbuffer is activated/deactivated
Meas. val. series number of stored series of measured values
Occup. logger percentage of memory actually used
To Next Page
Loading...
Need help?
General
