9 Measurement
9.8 Repeated display of measured values FLUXUS H721
2022-05-15, UMFLUXUS_H721V1-5EN
128
9.8 Repeated display of measured values
• Select the program branch Measurement to return to the measured value display.
• Press ENTER.
The following display appears:
•Select Show measurement in the scroll list.
• Press ENTER.
The measured values are displayed.
9.9 Execution of special functions
Some of the keys have special functions. They can be used to enter data, to navigate through scroll lists and to execute
special functions.
Some function are executed in the context of the channel that was last visible on the display.
• Press and hold C until the menu item Execute command is displayed.
Totalizers
• Select the list item Totalizers.
• Press ENTER.
The following scroll list appears:
Fig. 9.11: Scroll list in the program branch Measurement
Measurement\Show measurement
Tab. 9.11: Special functions
key function
toggling between the AutoMux and HumanMux mode
totalizer display
triggering of snaps
toggling between the displays of the activated channels
toggling between the TransitTime and the FastFood mode
display of the scroll list in the program branch Measurement
ENTER display of the diagnostic window
Measurement\Execute command\Totalizers
To Next Page
Loading...
