6 Mounting
FLUXUS H721
25
UMFLUXUS_H721V1-5EN, 2022-05-15
6 Mounting
Risk of explosion when using the measuring equipment in explosive atmospheres (ATEX, IECEx)
This may result in personal or material damage or dangerous situations.
→ Observe the "Safety instructions for the use in explosive atmospheres" (see document SIFLUXUS).
Risk of explosion when using the measuring equipment in explosive atmospheres (TR TS)
This may result in personal or material damage or dangerous situations.
→ Observe the "Safety instructions for the use in explosive atmospheres" (see document SIFLUXUSRU).
Installation, connection and start-up by unauthorized and unqualified personnel
This may result in personal or material damage or dangerous situations.
→ Any work on the transmitter has to be carried out by authorized and qualified personnel.
Working in mines or cramped confines
Risk of intoxication and/or asphyxiation because of emerging gases, risk of injuries because of cramped
conditions.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
Touching live parts
Electric shock or arc faults can lead to severe injuries. The measuring equipment can be damaged.
→ Prior to any work on the transmitter (e.g., installation, dismounting, connection, start-up), the
transmitter has to be disconnected from the power supply. It is not sufficient to remove the internal fuse
of the instrument.
Safety and accident prevention regulations for electrical systems and equipment
Failure to observe these regulations may lead to severe injuries.
→ Observe the safety and accident prevention regulations for electrical systems and equipment.
Touching hot or cold surfaces
This may result in injuries (e.g., thermal damages).
→ Observe the ambient conditions at the measuring point during installation.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
To Next Page
Loading...
Need help?
General
