Flexim FLUXUS H721 - Page 206

Annex
A Menu structure FLUXUS H721
2022-05-15, UMFLUXUS_H721V1-5EN
206
Configuration of outputs
Options Special functions
Channel x
Current output
Outputs
[4]
Active Passive
→ Current
→ Voltage
→ Frequency
→ Binary
… Enable
No Yes
Source item
[1] [1] [1] [2]
Sound speed Flow quantities Totalizers Fluid properties Diagnostic values Miscellaneous Event trigger Pulse
Pulse value
Status Values
→ R1
→ R2
→ R3
→ R4
Pulse width
Output range Output range Error value
Status OK Error value Measured values [3]
Measured values [3]
Absolute value Sign
Absolute value Sign
Start of meas.
range
Start of meas.
range
Start of meas.
range
Idle state End of meas. range
End of meas. range Output info Output info
Output info Output info Test signal Test signal
Test signal Test signal Test mea. range Test mea. range
Test mea. range
Legend
[1] not available for calculation channels
[2] only available for binary outputs supporting pulse output
[3] requested only if the physical quantity can adopt a negative value
[4] only if switchable current outputs are available
2
1