Flexim FLUXUS H721 - Page 45

6 Mounting
FLUXUS H721 6.2 Transducers
45
UMFLUXUS_H721V1-5EN, 2022-05-15
• Tighten the cover screws, see Fig. 6.33.
Fig. 6.32: Adjustment of the transducer distance
1–cover
2 – strain relief clamp
3 – equipotential bonding terminal
a – transducer distance
Notice!
Make sure that the coupling foil remains on the contact surface of the transducers. For information concerning the
coupling foil, see the safety data sheet.
Fig. 6.33: Variofix L with transducers on the pipe
1 – equipotential bonding terminal
2 – cover screws
1
2
a
3
2
22
2
1
1