Flexim FLUXUS H721 - Page 55

6 Mounting
FLUXUS H721 6.2 Transducers
55
UMFLUXUS_H721V1-5EN, 2022-05-15
Remove the cover from the mounted transducer mounting fixture Variofix C as follows:
• Loosen the screws (see Fig. 6.56).
• Use a lever tool to remove the cover.
• Insert the lever tool (max. 3 mm) in one of the 4 openings of the cover (see Fig. 6.57).
• Press the lever tool against the fixture.
• Bend the cover outwards and release it from the anchoring.
• Repeat the steps for the other 3 openings.
• Remove the cover from the rail.
Fig. 6.56: Variofix C with transducers on the pipe
1–cover
2–screw
Fig. 6.57: Removal of the cover
1 – lever tool
2 – support
2
1
2
2
1