7 Connection PIOX S70x
UMPIOX_S7V4-6-3EN, 2018-10-10 83
7.8 SD Card (Optional)
Additionally, the transmitter PIOX S704, S705 can be equipped with an SD card (see Fig. 7.53). Measured values can be
stored on the SD card for a longer period of time.
At first, the serial data transmission has to be parametrized. For the parametrization and activation of the serial data trans-
mission see section 13.2.
When the housing is opened, the SD card can be extracted and the measured values can be read out by a PC.
Attention! Observe the "Safety Instructions for the Use in Explosive Atmosphere" (see document SIFLUXUS).
Fig. 7.53: Transmitter PIOX S70x (example with PIOX S704)
To Next Page
Loading...
Need help?
General
