HF2211 Serial Server Device User Manual
http://www.iotworkshop.com - 34 -
Figure 36. Web Page Configure Timeout
3.8. Route Setup
The data received from Socket channel can be set to another socket channel. (Default: socket
Destination channel is UART, It also can be other Socket channel, Or take the Socket as log print
usage)
The below example shows the default netp Socket channel route setting to Socket1, Socket1
configure as TCP Server mode and route setting to UART. So the netp Socket channel received
UART data will output to Socket1, and Socket1 channel will output to serial output.
Figure 37. Route function setup example
To Next Page
Loading...