Flexport HF2211 - Uart;Frame Directory; Uart;Frame;Framelen Command; Uart;Frame;Frametime Command; Uart;Frame;Tag Command

HF2211 Serial Server Device User Manual
http://www.iotworkshop.com - 55 -
 Frame: Enable auto-frame function. Relevant parameters are set in Frame
command.
4.2.1.31. UART/Frame Directory
 Function: Display/Set UART frame directory.
 Format:
 Tab key query
4.2.1.32. UART/Frame/FrameLen Command
 Function: Display/Set UART auto-frame frame length
 Format:
 Query
<FrameLen>
 Set
<FrameLen> [value]
 Parameter:
Set UART auto-frame length, Setting is valid immediately.
 value: Default: 8, Range: 8～1400.
4.2.1.33. UART/Frame/FrameTime Command
 Function: Display/Set UART auto-frame time
 Format:
 Query
<FrameTime>
 Set
<FrameTime> [value]
 Parameter:
Set UART auto-frame time, Setting is valid immediately.
 value: Default: 100ms, Range: 100～10000.
4.2.1.34. UART/Frame/Tag Command
 Function: Display/Set UART auto-frame Tag
 Format:
 Query
<Tag>
 Set
<Tag> [Enable/Disable]
 Parameter:
Set UART auto-frame tag. Only transmit data from tag head to tag tail. Filter the other
datas. Setting is valid immediately.
 Enable: Enable auto-frame tag function.
 TagHead: LabelHead. Default: 0x55, Single byte data.
 TagTail: LabelTail. Default: 0xAA, Single byte data.