Flexport HF2211 - Exit Command; Fwupgrade Instruction; Quit Command

HF2211 Serial Server Device User Manual
http://www.iotworkshop.com - 61 -
4.2.1.50. Exit Command
 Function：Exit Cli command mode
 Format：
 Set
<Exit>
4.2.1.51. Quit Command
 Function: Quit the current and go the father Cli command directory.
 Format:
 Set
<Quit>
4.2.1.52. FwUpgrade Instruction
 Function: Upgrade product firmware.
 Format:
 Set
FwUpgrade [url]
 Parameter:
Do upgrade function, if upgrade success, it will feedback “Upgrade OK”, if fail, output
“Upgrade FAIL”, reboot to run with new firmware if success
 url: firmware url resources, Ex: http://192.168.0.101/mfw.bin