Flexport HF2211 - SYS;JCMD Instruction; SYS;MAC Instruction; SYS;NTP Instruction; Sys;Web Instruction

HF2211 Serial Server Device User Manual
http://www.iotworkshop.com - 50 -
 Disable: Disable Telnet function.
4.2.1.13. SYS/Web Instruction
 Function: Display/Set Web config function.
 Format:
 Query
<Web>
 Set
<Web> [Enable/Disable]
 Parameter:
Webpage is used for config module working parameters. Setting is valid after reboot.
 Enable: Enable Web config function. Default: Enable.
 Input Port Number: Web Port Number. Default: 80
 Disable: Disable Web config function
4.2.1.14. SYS/MAC Instruction
 Function: Display/Set MAC address.
 Format:
 Query
<MAC>
 Set
<MAC> [8888 value]
 Parameter:
Global unique MAC Address. It is not allowed to modify it.
 value: MAC address value.
4.2.1.15. SYS/JCMD Instruction
 Function: Display/Set Jason command function.
 Format:
 Query
<JCMD>
 Set
<JCMD> [Enable/Disable]
 Parameter:
Jason command is used for config module. IOTManage software use this mechanism. If
disable JCMD function, IOTManage is no longer valid. Setting is valid after reboot.
 Enable: Enable JCMD function. Default: Enable.
 Disable: Disable JCMD function.
4.2.1.16. SYS/NTP Instruction
 Function: Display/Set NTP function.
 Format:
 Query
<NTP>
 Set