Flexport HF2211 - Sys;Network;Hostname Instruction; Sys;Network;Mode Command; Sys;Telnet Instruction

HF2211 Serial Server Device User Manual
http://www.iotworkshop.com - 49 -
<DNS>
 Set
<DNS> [IP]
 Parameter:
When DHCP function is Disabled, this setting is valid. Setting is valid after reboot.
 IP Address: DNS server address. Default: 10.10.100.254.
4.2.1.10. SYS/Network/Mode Command
 Command: Display/Set working mode.
 Format:
 Query
<Mode>
 Set
<Mode> [Router/Bridge]
 Parameter:
Setting is valid after reboot.
 Router: Router mode, Default value.
 Bridge: Bridge mode.
4.2.1.11. SYS/Network/Hostname Instruction
 Function: Display/Set Hostname.
 Format:
 Query
<Hostname>
 Set
<Hostname> [name]
 Parameter:
Hostname is the name which show in router DHCP client list. Setting is valid
immediately.
 Name Address: Hostname, length range: 1~30 characters. Default: HF2211.
4.2.1.12. SYS/Telnet Instruction
 Function: Display/Set Telnet function.
 Format:
 Query
<Telnet>
 Set
<Telnet> [Enable/Disable]
 Parameter:
See appendix for detailed Telnet function usage. Telnet is used for remote send Cli
command or transmit data, Setting is valid after reboot.
 Enable: Enable Telnet function. Default: Enable.
 Input Port Numbver: Telnet Port Number. Default: 23
 Input Echo Mode: Enable/Disable Cli command echo function. Default: Enable