Flexport HF2211 - Sys;Auth;Password Command; Sys;Network Directory; Sys;Network;Dhcp Command; Sys;Network;Dns Command

HF2211 Serial Server Device User Manual
http://www.iotworkshop.com - 48 -
 value: set value. Length range 1～29 characters
4.2.1.5. SYS/Auth/Password Command
 Function: Display/Set web or Telnet Cli command login password(function see appendix)
 Format:
 Query
<Password>
 Set
<Password> [value]
 Parameter:
Setting is valid immediately
 Password: Login password. Default: admin
 value: set value. Length range 1～29 characters
4.2.1.6. SYS/Network Directory
 Function: Display/Set related network information.
 Format:
 Tab Query
4.2.1.7. SYS/Network/Show Command
 Function: Display network related information
 Format:
 Query
<Show>
4.2.1.8. SYS/Network/DHCP Command
 Function: Display/Set DHCP Client function
 Format:
 Query
<DHCP>
 Set
<DHCP> [Enable/Disable]
 Parameter:
Setting is valid after reboot.
 Enable: Enable DHCP function. The device will get DHCP IP from router when
Ethernet port is connected to router LANN port. Default: Enable.
 Disable: Disable DHCP function. Allocate device static IP address according to the
hit of intputting IP and gateway address.
4.2.1.9. SYS/Network/DNS Command
 Command: Display/Set DNS IP address.
 Format:
 Query